Help Linux - до свидания! См. Новости проекта

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Nagios Distributed Monitoring configuration ======

===== Central Server configuration (Ubuntu 12.04 Server LTS) =====

==== Installation and configuration ====

  - Install packages <code bash>
sudo apt-get install nagios3 --no-install-recommends	# use "--no-install-recommends" in order not to install samba packages
sudo apt-get install nagios-images
sudo apt-get install nsca && update-rc.d nsca enable
</code>
  - Make directories for custom configs <code bash>
sudo mkdir -p /etc/nagios3/custom/{commands,hosts,services,templates}
</code>
  - Edit /etc/nagios3/nagios.cfg <code>
--- nagios.cfg.orig     2012-02-15 21:10:11.000000000 +0400
+++ nagios.cfg  2012-05-17 14:40:43.734332705 +0400
@@ -55,6 +55,10 @@
 #cfg_dir=/etc/nagios3/printers
 #cfg_dir=/etc/nagios3/switches
 #cfg_dir=/etc/nagios3/routers
+cfg_dir=/etc/nagios3/custom/commands
+cfg_dir=/etc/nagios3/custom/hosts
+cfg_dir=/etc/nagios3/custom/services
+cfg_dir=/etc/nagios3/custom/templates
 
 
 
@@ -142,7 +146,8 @@
 # you will have to enable this.
 # Values: 0 = disable commands, 1 = enable commands
 
-check_external_commands=0
+#check_external_commands=0
+check_external_commands=1
 
 
 
@@ -1027,7 +1032,8 @@
 # manner.
 # Values: 1 = enabled freshness checking, 0 = disable freshness checking
 
-check_host_freshness=0
+#check_host_freshness=0
+check_host_freshness=1




</code>
  - Change permissions to /var/lib/nagios3 <code>
# Change directory permissions and make the changes permanent in order to make external commands work (check /usr/share/doc/nagios3/README.Debian for more information)
/etc/init.d/nagios3 stop
dpkg-statoverride --update --add nagios www-data 2710 /var/lib/nagios3/rw
dpkg-statoverride --update --add nagios nagios 751 /var/lib/nagios3
/etc/init.d/nagios3 start
</code>
  - Add /etc/nagios3/custom/templates/generic-host-passive.cfg <code>
define host{
        name                            generic-host-passive
        use                             generic-host
        active_checks_enabled           0
        check_freshness                 1
        check_command                   return-unknown
        register                        0
        }
</code>
  - Add /etc/nagios3/custom/templates/generic-service-passive.cfg <code>
define service{
        name                            generic-service-passive
        use                             generic-service
        active_checks_enabled           0
        check_freshness                 1
        check_command                   return-unknown
        register                        0
        }
</code>
  - Create a user and password <code>
# Create htpasswd file and set a password for nagiosadmin (this information is used to access the web-interface)
htpasswd -c /etc/nagios3/htpasswd.users nagiosadmin
</code>
  - Examples of a passive host and a service definitions:
    * /etc/nagios3/custom/hosts/server1.cfg <code>
# Define host "server1"
define host{
        use             generic-host-passive
        host_name       server1
        }
</code>
    * /etc/nagios3/custom/services/disk-space.cfg <code>
# Define service "Disk Space"
define service{
        use                             generic-service-passive
        host_name                       server1
        service_description             PING
        }
</code>

==== Usage ====

  * Apply the new configuration <code>sudo /etc/init.d/nagios3 reload</code>
  * Use http://IPADDRESS/nagios3 in order to access nagios web-interface

===== Distributed Server configuration (Ubuntu 12.04 Server LTS) =====

==== Installation and configuration ====

  - Install packages <code bash>
sudo apt-get install nagios3-core
sudo apt-get install nagios3-cgi --no-install-recommends	# use "--no-install-recommends" in order not to install apache2 packages
sudo apt-get install nsca
</code>
  - Disable localhost checking in order not to confuse with localhost on the Central Server <code bash>
sudo rename 's/$/.disabled/' /etc/nagios3/conf.d/{extinfo_nagios2,hostgroups_nagios2,localhost_nagios2,services_nagios2}.cfg
</code>
  - Edit /etc/nagios3/nagios.cfg <code>
--- nagios.cfg.orig	2011-06-07 17:08:33.000000000 +0400
+++ nagios.cfg	2012-05-18 14:57:29.343833057 +0400
@@ -55,6 +55,9 @@
 #cfg_dir=/etc/nagios3/printers
 #cfg_dir=/etc/nagios3/switches
 #cfg_dir=/etc/nagios3/routers
+cfg_dir=/etc/nagios3/commands
+cfg_dir=/etc/nagios3/hosts
+cfg_dir=/etc/nagios3/services
 
 
 
@@ -808,7 +811,8 @@
 # service notifications when it is initially (re)started.
 # Values: 1 = enable notifications, 0 = disable notifications
 
-enable_notifications=1
+#enable_notifications=1
+enable_notifications=0
 
 
 
@@ -913,7 +917,8 @@
 # implementing distributed monitoring.
 # Values: 1 = obsess over services, 0 = do not obsess (default)
 
-obsess_over_services=0
+#obsess_over_services=0
+obsess_over_services=1
 
 
 
@@ -926,6 +931,7 @@
 # more information on implementing distributed monitoring.
 
 #ocsp_command=somecommand
+ocsp_command=submit_check_result_via_nsca_service
 
 
 
@@ -937,7 +943,8 @@
 # implementing distributed monitoring.
 # Values: 1 = obsess over hosts, 0 = do not obsess (default)
 
-obsess_over_hosts=0
+#obsess_over_hosts=0
+obsess_over_hosts=1
 
 
 
@@ -950,6 +957,7 @@
 # more information on implementing distributed monitoring.
 
 #ochp_command=somecommand
+ochp_command=submit_check_result_via_nsca_host
 
 
 
</code>
  - Edit /etc/nagios3/resource.cfg <code>
--- resource.cfg.orig	2011-06-07 17:07:47.000000000 +0400
+++ resource.cfg	2012-05-12 17:39:46.125679961 +0400
@@ -24,7 +24,7 @@
 $USER1$=/usr/lib/nagios/plugins
 
 # Sets $USER2$ to be the path to event handlers
-#$USER2$=/usr/lib/nagios/plugins/eventhandlers
+$USER2$=/usr/share/nagios3/plugins/eventhandlers
 
 # Store some usernames and passwords (hidden from the CGIs)
 #$USER3$=someuser
</code>
  - Add /etc/nagios3/commands/submit_check_result_via_nsca_host.cfg <code>
define command{
        command_name    submit_check_result_via_nsca_host
        command_line    $USER2$/distributed-monitoring/submit_check_result_via_nsca $HOSTNAME$ $HOSTSTATEID$ '$HOSTOUTPUT$|$HOSTPERFDATA$'
}
</code>
  - Add /etc/nagios3/commands/submit_check_result_via_nsca_service.cfg <code>
define command{
        command_name    submit_check_result_via_nsca_service
        command_line    $USER2$/distributed-monitoring/submit_check_result_via_nsca $HOSTNAME$ '$SERVICEDESC$' $SERVICESTATEID$ '$SERVICEOUTPUT$|$SERVICEPERFDATA$'
}
</code>
  - Examples of an active host and a service definitions:
    * /etc/nagios3/hosts/server1.cfg <code>
define host{
        use                     generic-host
        host_name               server1
        address                 127.0.0.1
        }
</code>
    * /etc/nagios3/services/ping.cfg <code>
define service {
        use                             generic-service
        service_description             PING
        check_command                   check_ping!100.0,20%!500.0,60%
        host_name                       server1
}
</code>

==== Usage ====

  * Apply the new configuration <code>sudo /etc/init.d/nagios3 reload</code>

===== Links =====

  * http://nagios.sourceforge.net/docs/3_0/distributed.html

{{tag>ubuntu nagios}}
Help Linux - до свидания! См. Новости проекта

Главное меню

Дополнительно
